We are still manufacturing and shipping products. Thank you for your support. Last Updated: Dec 3, 2020
My Cart: 0 item(s)

Product Search
Delivered for $49*
Product Search

Secure Checkout

Install Instructions for 10-1008


Installation Instructions

Vehicle Application

  • YEAR: 2017-2020
  • MAKE: Ford
  • MODEL: F-250 and F-350 Crew Cab Long Bed,
  • ENGINE: 6.7L Diesel

Required Tools

  • Flathead Screwdriver or 5/16" Nut Driver
  • Torx 30
  • Mallet/Hammer
  • 13mm Socket
  • 19mm Deep Socket
  • 10mm Socket
  • Ratchet
  • 12" Driver Extension

Optional Tools

  • Vehicle Lift
  • Transmission Jack
  • Precision Pick

Before You Start

  • Please read the entire product guide before proceeding
  • Ensure all parts are present.
  • If you are missing any parts, please call or text us at (909)-675-1313
  • Do not work on your vehicle while the underbody components are hot.
  • Make sure the vehicle is in park or the parking brake is set if you plan on working on the ground. If working on a lift, make sure the vehicle is lifted safely and securely.

Before You Start

Drain your original fuel tank before beginning the S&B Installation process. S&B Tanks recommends removing only an empty or near empty tank for your safety. We recommend using a siphon or electronic transfer pump.

Please note, that this tank does not have a built-in sump for aftermarket lift pumps. The fitting on the bottom of the tank should only be used for draining. The fuel pickup on aftermarket lift pumps be done according to the aftermarket lift pump manufacturers specifications.

Install time: 3-4 hours